User`s manual

User’s manual · ETWF 310
- 10 - ETWF 310 version_en_1.1 FTE maximal
Next it is attached the identification table (NID/ONID) of the main satellites. You will be able to find more information in
the law ETSI TR 101 162 v1.2.1.
Satellite Net ID Original Net ID Description
Hotbird 13ºE (Eutelsat 13ºE) 318 318 Eutelsat 13ºE System
Astra 19.2ºE 1 1 Astra Satellite Network 19,2ºE
Astra 23ºE 3-25 3-25 Astra n (n=1-23)
Astra 28,2ºE 2 2 Astra Satellite Network 28,2ºE
Nilesat 7ºW 2048 2048 Nilesat 101
Hispasat 30ºW 33 33 Hispasat Network 1
PRO 201
Note: From PRO 201 programmer you can only carry out the programming of a single module, in order to carry
out the programming of several modules at the same time you have to use a mediaMAX EVO or mediaMAX
MINI series field strength meter.
When you connect the PRO 201 programmer, it will proceed to recognize the
module and to show the main menu.
In the main menu are shown the different options for configuring the module.
We have to use the “Up” and “Down” buttons of the keyboard in order to move to
the different options, and to get into the submenus we have to press “OK” button.
1. Manual
Inside the “manual” menu there are specified the different options for
setting up the input, output and modulation parameters.
1. This field shows the type of parameter that is selected at the moment.
Options: Input Sat, Out Terr, Out TV.
2. This field shows the parameter that is selected. In order to move
around the different options we have to use the “Up” and “Down” buttons
of the keyboard.. Click on OK to edit the selected parameter and
Right/Left for changing it. Once it is configured press OK.
Satellite input ( Input Sat)
I With this option you will be able to configure the input parameters of each one
of the two A/V inputs:
- Coding rate: Coding rate of the output video. Options: Auto or 0-6750 Kbps.
- Video Resolution: Output Video Resolution. Options: 360x480, 352x240,
176x120, 480x480, 545x480, 720x480.
- Input selecting: It allows selecting the input that will be configured. In order to configure input 1, please select 0 and if
you want to configure input 2, please select 1. Once the input has been selected, the rest of the parameters of this menu
will configure the selected input signal, with the exception of the parameters for “Video Resolution” and “Codification
Rate”, which are the same for both inputs.
- Audio mode: It allows selecting the audio mode of the output. Options: Stereo, J.Stereo, Dual and Mono.
- Audio rate: It allows selecting the audio rate in Kbits/s. Options: 64, 96, 160, 192, 256, 288, 320, 352, 384, 416 and
448.
- Video framerate: Number of images per second. Options: 50/60.
- Video Relation: Output Image Relation (appearance). Options: Auto, 1/1, 4/3, 16/9, 2.21/1.
ETWF310 *Input Ana
RF level: 013
>Enc.Bitrate: 6750
Vid.Resol: 720x480
1
2
ETWF310
<Manual> Config
Auto
ETWF310 *Input Ana
Input: 0
>Aud mode: Dual Ch
Aud rate: 192