User`s manual

User’s manual · DVB 310 T / DVB 310 T CI
- 3 - DVB 310 T / DVB 310 T CI version_en_1.2 FTE maximal
Programming
DVB 310 T has two ethernet connectors. In order to program a module we have to connect the programmer to the “PRO
201” connector.
Next, we will proceed to recognize the module and to show the main menu. The firmware of the module as well as the
different submenus is shown in this menu.
We have to use the “Up” and “Down” buttons of the keyboard in order to move to the different options, and to get into the
submenus we have to press “OK” button.
MANUAL
Inside the “manual” menu there are the configuring options of the multiplex we want to tune in:
In an external monitor, the menu is shown as follows:
In order to move around the different options we have to use the “Up” and “Down” buttons of the keyboard.
With the buttons “Left” and “Right” we can change the value in most of the options.
To return to the previous menu, press “ Cancel” button.
If we monitor the menu of the module through A/V connector, we will see the instructions in the screen all the time.
Options:
- TV System: Format of TV signal. Options: PAL B/G, PAL I, PAL D/K, SECAM
- Video level: Level of the video carrier in A/V output. Options: -8 a 8.
- Picture: Screen format. Options: AUTO, 4:3 Letter Box, 4:3 Pan & Scan, 16:9 Letter Box.
- CI CAS: (*Only available in DVB 310 T CI model). It configures the conditional access system. By pressing “Left” or
“Right” a new menu will be opened. After that, we can select through “OK” button or return to the previous menu with the
“Cancel” key in order to configure the different options of the Conditional Access.
DVB 310 T
>TV SYSTEM:PAL B/G <
Video Level: 1
P
icture
:
AUTO
DVB310-T VSB CI
>Manual< Tv-Mode
A
uto V
-
3
.0.
3
3
General parameters of
module programmation.
Programming of the
multiplex parameter.
List of tunned channels and PID’s information,
allow select channel to view, from TV or Radio
lists.
This window gives you
information about function
of OSD selected. How to
programm it or which are
the options in that
moment.
It provides information
about the firmware
version of the module.
Allows acces to special
firmware functions as
Updates with newer
versions or Reset function.