Datasheet

User’s guide · RCM 310
- 2 - RCM 310 version_en_1.0 FTE maximal
1.3. Description and connections
The RCM310 is the remote control unit for the devices of the 310 family.
It allows monitoring and remotely controlling up to 72 devices from the 310 series (at the rate of a maximum of 18
devices for each one of the four DVBUS connectors of the RCM 310).
It has a web server that allows controlling the RCM from any browser (we recommend you to use Firefox for a better
usage experience). It also has a GMS/GPRS modem that allows sending and receiving text messages, as well as GPRD
connections.
RCM310 – FRONT PANEL
1. BOOT button: It allows rebooting the RCM 310 to
the initial status by default.
2. Green Led L2*: Programmable Led that allows
pointing out the different status of the device.
3. Red Led L1*: Programmable Led that allows
pointing out the different status of the device.
4. RJ45 1 and 3 DVBUS connectors that allow
connecting up to 18 DVBUS devices each.
5. RJ45 2 and 4 DVBUS connectors that allow
connecting up to 18 DVBUS devices each.
6. USB Host connector 2.0.
7. Ethernet connector for the connection to the web
server of the RCM310.
8. RF 47-862MHz monitoring input
9. Optocoupled digital inputs S1-S4 (inputs without
voltage) that allow activating alarms.
10. Relay outputs OUT1-OUT4 that allow controlling
external devices.
11. Connection for the GSM/GPRS antenna.
RCM310 – REAR PANEL
12. Power supply input.
13. SIM card connector to enable the SMS and GPS
options.
12
13