Datasheet

User’s guide · RCM 310
- 30 - RCM 310 version_en_1.0 FTE maximal
7.3. Updating the Device Firmware
This option allows updating the firmware of the devices that are connected to the DVBUS.
By pressing “Updating” a window will appear. It will allow you to select a binary file for the firmware update.
The file will be transferred from the hard disk of the computer from where you are navigating to the RCM 310, where it will
be analyzed in order to search for the connected devices that are compatible to the transferred file.
A list with the different connected devices that are compatible to the transferred file will appear. You will be able to select
the devices where the firmware will be updated.
7.4. Creating / Implementing programs to all the devices
The “Creating a program with all the devices” option generates a program file with all the devices that are connected to
the DVBUS. This file will be stored in the computer from where you are navigating.
The “implementing a new program to all the devices” option will implement a program file to all the devices that are
connected to the DVBUS.
In cases where the configuration of the program file does not coincide exactly with the connected devices, the following
method will be applied:
• If a device is found in the program but it is not physically connected to the system, it will be just ignored.
• If a device that is physically connected to the system is not defined in the program, obviously it will not be
configured.
• If the program has a lower number of devices than the devices physically connected to the system, the program
content will be applied according to UID increasing order of each device. The remaining devices will not be
configured.
• If the program has more devices than those that are physically connected, they will be applied according to the
order defined in the program.
7.5. Rebooting all the devices in the BUS
This button allows launching a rebooting process in all the devices that are physically connected to the DVBUS. The time
that the devices need in order to be operative again after the reboot can change, depending on the model.