Datasheet

User’s guide · RCM 310
- 28 - RCM 310 version_en_1.0 FTE maximal
Chapter 7. Devices
The “Devices” page allows making several actions concerning the devices that are connected to the DVBUS, as well as
configuring the system RF levels. You can go to this page through the “Devices” tab.
7.1. Search of devices in the Bus
Press the “Making a search” button in order to start the process of searching devices in the DVBUS. This process will take
several seconds, depending on the number of devices that are connected.
Once the search is finished you can go to the “Homepage” in order to check the modules list, as well as proceed to their
configuration.
Note: If you wish to connect more devices to the RCM 310, by connecting them to one of the DVBUS ports, you
will have to make a new search once the new devices are connected to the DVBUS. When making a devices
search, the list of the previous devices is deleted, and only the found devices will be shown.
7.2. RF Signals and Alias
By pressing this button you will go to the window for the RF external signals administration, as well as for RF levels and
frequency configuration.