Datasheet

User’s guide · RCM 310
- 27 - RCM 310 version_en_1.0 FTE maximal
The available “Automatic Configuration” button allows loading the current values of the PC from where you are navigating.
The “Synchronizing all the devices” option allows sending the updated date and time to all the devices that are connected
by DVBUS to the RCM 310, so all the connected devices will have the same time as the RCM 310 (important option for
the coherence of the events file of the RCM 310).
6.7. Logging off after inactivity
This option sets how much time it will take to log off when there is no activity (that is, there are no operations made with
the RCM 310 from the browser). Keep in mind that only a user can be connected to the RCM 310 at the same time. In
case that you do not log off by using the corresponding tab, this option allows that after the chosen time has gone by, the
RCM 310 logs off automatically, allowing that other users can gain access to the RCM 310.
6.8. Net configuration
This option allows configuring the typical parameters of the net where the RCM 310 will be connected to. If you have any
doubts about the values you have to enter, seek advice from your network administrator, since the values that have to be
configured depend on the net where the RCM 310 is connected.