Datasheet

User’s guide · RCM 310
- 25 - RCM 310 version_en_1.0 FTE maximal
Chapter 6. RCM310 Configuration
The RCM 310 tab leads to the typical configuration options of the RCM 310
6.1. Updating the system
This button allows updating the RCM 310 firmware. A window will be opened by pressing “Updating”. It will allow choosing
an updating file for the RCM 310 (ftgepkg kind of file).
The file will be transferred from the hard disk of the PC where you are navigating to the RCM 310.
6.2. Rebooting the system
This option allows rebooting the RCM 310. There are two options of rebooting:
• SW Reset: The RCM 310 program gets rebooted, but it is just a software matter, none of the system supplies
turns off.
• HW Reset: The HW gets rebooted and the main supply gets cut. This kind of reset guarantees that all the inner
components of the RCM 310 are rebooted.
6.3. Saving – Restoring the system configuration
The “Saving system configuration” option generates a file that contains the current configuration of the RCM. This file
contains:
• RCM310 alias.
• Detected modules.
• Alarms.
• E-mails and SMS.
• Everything inside of the “RCM310” tab.