User's Manual

1.3.2 Portable Use
A portable Tobii Dynavox I-Series can be used in two (2) different positions.
● Upright orientation
● Mounted (see section 1.3.3 Mounted Use)
Upright Orientation
1.3.3 Mounted Use
The Tobii Dynavox I-Series can be mounted on to several mounting systems. Mount the Tobii Dynavox Quick Release
(QR) adapter plate on to the device. The Tobii Dynavox QR adapter plate can be attached to the following support
systems:
● REHAdapt/ConnectIT
● Daessy
For more information, see 3.4 Tobii Dynavox Quick Release Adapter Plate, page 18 and Appendix F Approved Accesso-
ries, page 56.
1.4 Package Contents
It is recommended to keep the original packaging materials for the Tobii Dynavox I-Series.
If device needs to be returned to Tobii Dynavox for Warranty related issues or repair, it is beneficial that the origi-
nal packaging or equal equivalent is used for shipping. Most shipping carriers require at least 2 inches of packing
material around the device.
Note: Due to Joint Commission regulations, any shipping materials including boxes sent to Tobii Dynavox must
be discarded.
1.4.1 Tobii Dynavox I-Series with Tobii Dynavox Snap™+ Core First
®
/ Communicator 5
The items below are included with your Tobii Dynavox I-Series package:
● 1 Device (13.3″ or 15.6″)
● 1 Adjustable Base
● 1 Eye tracker (built in)
● 1 Tobii Dynavox QR adapter plate
● 1 Battery
● 1 Power Supply
● 1 Windows 10 license
● 1 Tobii Dynavox Communicator 5 software (pre-installed)
● 1 Tobii Dynavox Snap + Core First software (pre-installed)
● 1 Tobii Dynavox Pathways for Core First software (pre-installed)
● 1 Boardmaker Student Center software (pre-installed)
#12004244 Tobii Dynavox I-Series User’s manual v. - en-US
1 Introduction
9