User's Manual

6 Product Care
6.1 Temperature & Humidity
6.1.1 General Use - Operating Temperature
The Tobii Dynavox I-Series is best kept in dry conditions at room temperature. The recommended range for temperature
and the humidity value for the device is as follows:
● Ambient temperature: 0℃ to 35℃ (32℉ to 95℉)
● Humidity: 10% to 95% (no condensation on the device)
● Atmospheric Pressure: 70 kPa to 106 kPa (525 mmHg to 795 mmHg)
6.1.2 Transportation and Storage
For transportation and storage the recommended range for temperature and the humidity value for the device is as
follows:
● Temperature: -30℃ to 70℃ (-22℉ to 158℉)
● Humidity: 10% to 95% (no condensation on the device)
● Atmospheric Pressure: 70 kPa to 106 kPa (375 mmHg to 795 mmHg)
The Tobii Dynavox I-Series is not waterproof or fully water resistant. The device should not be kept in excessively humid,
damp or otherwise wet conditions. Do not submerge the device in water or in any other liquid. Be careful not to allow liquids
to be spilled upon the device especially in the connector areas without the I/O covers in place.
The device is registered as IP Class 54.
The IP class pass for device only, with I/O covers in place. Adaptor mode is excluded.
6.2 Cleaning of the Tobii Dynavox I-Series Device
Before cleaning the Tobii Dynavox I-Series device, shut it down and unplug all cables. The Tobii Dynavox I-Series may be
cleaned using a hospital grade cleaning product, like Mikrozid
®
sensitive liquid or equivalent, for infection control. The
cleaning should be done using a wipe style product only. Wipe only outer surfaces of the Tobii Dynavox I-Series device
and allow the product to dry naturally or follow the wipe instructions. Do not use spray product which may saturate the Tobii
Dynavox I-Series device or allow moisture into the unit.
6.3 Placement
Only use the recommended mounts specified by your local reseller or sales representative and make sure that they are
mounted and fastened correctly according to the instructions. Do not place the device on unstable and uneven surfaces.
6.4 Transporting the Tobii Dynavox I-Series Device
Disconnect all the cables from the Tobii Dynavox I-Series while carrying the device.
When you transport the device for repair, shipment, or traveling, use the original casing and packaging materials.
It is recommended to keep the original packaging materials for the Tobii Dynavox I-Series.
If device needs to be returned to Tobii Dynavox for Warranty related issues or repair, it is beneficial that the origi-
nal packaging or equal equivalent is used for shipping. Most shipping carriers require at least 2 inches of packing
material around the device.
Note: Due to Joint Commission regulations, any shipping materials including boxes sent to Tobii Dynavox must
be discarded.
42
6 Product Care
#12004244 Tobii Dynavox I-Series User’s manual v. - en-US