User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Overview of the Tobii Dynavox I–13 and I–16
- 4 Batteries in the Tobii Dynavox I-Series
- 5 Using the Tobii Dynavox I-Series
- 6 Product Care
- Appendix A Support, Warranty, Training Resources and Trouble-shooting
- Appendix B Compliance Information
- Appendix C Computer Device States of Operation and LED Status
- Appendix D Technical Specifications
- Appendix E Maximum Allowed Temperature
- Appendix F Approved Accessories
1. Open the Tobii Dynavox Hardware Settings> Adaptive Buttons.
2. Select drop down list
3. Select one of the following actions:
● Disabled
● Send Keyboard Key
● Show/Hide Track Status (Default)
● Enable/Disable Eye Tracker Pause
● Calibrate Eye Tracker
5.9.1.2 Square Button
To change and select the touch action for the Square button.
1. Open the Tobii Dynavox Hardware Settings> Adaptive Buttons.
2. Select drop down list
3. Select one of the following actions:
● Disabled
● Send Keyboard Key
● Show/Hide Track Status
● Enable/Disable Eye Tracker Pause
● Calibrate Eye Tracker (Default)
5.9.2 Eye Tracker
5.9.2.1 Eye Tracking
5.9.2.1.1 Enabling the Eye Tracking
To enable the Eye Tracking on the device:
1. Open the Tobii Dynavox Hardware Settings> Eye Tracker.
2. Make sure the Eye Tracking is toggled On to enable the Eye Tracking.
5.9.2.1.2 Disabling the Eye Tracking
To disable the Eye Tracking on the device:
1. Open the Tobii Dynavox Hardware Settings> Switches.
2. Make sure the Eye Tracking is toggled Off to disable the Eye Tracking.
5.9.2.2 Eye Tracking Settings
To change the Eye Tracker Settings, select the Eye Tracking Settings button and you will be taken to the Eye Tracking
Settings application. For more information, see 5.3.4 Eye Tracking Settings.
36
5 Using the Tobii Dynavox I-Series
#12004244 Tobii Dynavox I-Series User’s manual v. - en-US