User's Manual

3. Select Yes to activate the selected profile or No to cancel.
4. Select Close to leave the page.
5.3.4.1.1.2 Deleting a Profile
1. Select the button with the name of the profile to delete.
2. Select the Delete button located in the top left corner of the screen.
3. Select Yes to delete the selected profile or No to cancel.
4. Select Close to leave the page.
5.3.4.1.2 Create New Profile
1. Select the Calibration type to use.
For more information, see 5.3.4.1.6 Calibration Type, page 29.
2. Select the Create new profile button.
3. Select Yes to continue or No to cancel.
4. Give the new profile a name.
Keyboard and mouse must be used.
Only Alpha-Numeric characters can be used.
5. Select the Next button.
6. Position the user so that the two dots, representing the user’s eyes, are in the center of the box shown on screen.
The calibration process will start when the right dot blinks at the user.
7. Follow the on-screen instructions for performing a calibration.
8. Check out the Calibration Results.
For more information, see 5.3.4.1.3 Calibration Results, page 27.
9. Select Close to accept the calibration.
5.3.4.1.3 Calibration Results
On the calibration results page, you will be able to see the result of the calibration for each of the calibration points. How
many calibration points displayed on the page varies depending on which calibration type you have chosen and how you
have customized the calibration.
A calibration point can have three (3) different status:
● Great (Green)
● Good (Yellow)
● No data (Red)
When using the “Accurate” calibration type, the calibration will automatically restart if the eye tracker can’t get
any data from a calibration point.
#12004244 Tobii Dynavox I-Series User’s manual v. - en-US
5 Using the Tobii Dynavox I-Series
27