User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Overview of the Tobii Dynavox I–13 and I–16
- 4 Batteries in the Tobii Dynavox I-Series
- 5 Using the Tobii Dynavox I-Series
- 6 Product Care
- Appendix A Support, Warranty, Training Resources and Trouble-shooting
- Appendix B Compliance Information
- Appendix C Computer Device States of Operation and LED Status
- Appendix D Technical Specifications
- Appendix E Maximum Allowed Temperature
- Appendix F Approved Accessories
Daessy REHAdapt
Make sure the required side of the Tobii Dynavox QR adapter plate is face away from the Tobii Dynavox I-Series for the
mounting system to use.
3.4.1 Mounting the Tobii Dynavox QR Adapter Plate
To mount the Tobii Dynavox QR adapter plate:
1. Place the Tobii Dynavox I-Series device face down on a flat surface.
2. Select the required side of the plate, see 1.3.3 Mounted Use, page 9.
3. Place the plate onto the device with the required side facing away from the unit.
4. Tighten the two (2) screws using a Torx T20 screwdriver to that fasten the plate to the unit.
3.4.2 Removing the Tobii Dynavox QR Adapter Plate
To remove the Tobii Dynavox QR adapter plate:
1. Place the Tobii Dynavox I-Series device face down on a flat surface.
2. Use a Torx T20 screwdriver to remove the two (2) screws that fasten the plate to the unit.
3. Remove the plate.
#12004244 Tobii Dynavox I-Series User’s manual v. - en-US
3 Overview of the Tobii Dynavox I–13 and I–16
19