Datasheet

4
Output Nominal Regulation Ripple/Noise Min Max peak
1 +3.3V
±5%
50mV 0.5A 21.0 A
2 +5V
±5%
50mV 0.5A 16.0 A
3 +12V1
±5%
120mV 0.5A 17.0 A
4 +12V2
±5%
120mV 0.5A 17.0 A
5 -12V
±10%
150mV 0 A 0.5 A
6 +5VSB
±5%
50mV 0.1 A 3A 3.5A
7
-5V
±10%
100mV
0 A 0.3A
*-5V Option, +5vsb peak <= 10ms.
(1) The +3.3V and +5V total output shall not exceed 105watts.
(2)total output for this subject power supply is 350 watts.
(3)Ripple and noise measurements shall be made under all specified load conditions through a
single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector
with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.
4.1.2. LOAD CAPACITY SPECIFICATIONS
The cross regulation defined as follows, the voltage regulation limits DC include DC Output
ripple & noise.
+12V1 +12V2 +5V +3.3V -12V +5Vsb -5V
1 11.14A 11.14A 7.38A 9.68A 0.33A 1.97A 0.1A
2 1A 1A 1A 21.0A 0.1A 3A 0.05A
3 17.0A 0.5A 3A 0.5A 0.5A 0.1A 0
4 4A 4A 16.0A 0.5A 0.05A 0.1A 0.3A
5 5.57A 5.57A 3.69A 4.84A 0.16A 0.98A 0
6 8.0A 9.0A 3A 0.5A 0.05A 0.1A 0.3A
7 0.5A 17.0A 3A 0.5A 0.5A 0.1A 0
8 0.5A 0.5A 3A 0.5A 0.05A 3A 0
9 2.23A 2.23A 1.48A 1.94A 0.07A 0.39A 0
10
0.5A 0.5A 0.5A 0.5A 0A 0.1A 0
4.1.3. HOLD-UP TIME (@FULL LOAD)
115V / 60Hz : 15mSec. Minimum.
230V / 50Hz : 15mSec. Minimum.
4.1.4.OUTPUT RISE TIME
(10% TO 90% OF FINAL OUTPUT VALUE, @FULL LOAD)
文件資料管制 文件資料管制 文件資料管制
4/10禁止翻印外洩 ESD11001280-R6.pdf 發行時間:2011/7/14 9:18 上午