Datasheet
3
1. GENERAL DESCRIPTION AND SCOPE
This is the specification of Model FSP350-70PFL; AC-line powered switching power supply
with active PFC (Power Factor Correction) circuit, meet EN61000-3-2 and with Full Range
Input features. Designed and manufactured by FSP GROUP.
The 5Vsb power is less than 1W
input
at power off mode (PS_ON input at high state) which is
comply with EuP Lot 6 year 2010 requirement.
The specification below is intended to describe as detailedly as possible the functions and
performance of the subject power supply. Any comment or additional requirements to this
specification from our customers will be highly appreciated and treated as a new target for us
to approach.
2. REFERENCE DOCUMENTS
The subject power supply will meet the EMI requirements and obtain main safety approvals
as following:
2.1 EMI REGULATORY
- FCC Part 15 Subpart J, Class ‘B’ 115 Vac operation.
- CISPR 22 Class ‘B’ 230 Vac operation.
3. PHYSICAL REQUIREMENTS
3.1 MECHANICAL SPECIFICATIONS
The mechanical drawing of the subject power supply, which indicate the form factor, location of
the mounting holes, location, the length of the connectors, and other physical specifications of the
subject power supply. Please refer to the attachment drawing.
4. ELECTRICAL REQUIREMENTS
4.1 OUTPUT ELECTRICAL REQUIREMENTS
The subject power supply will meet all electrical specifications below, over the full operation
temperature range and dynamic load regulation.
4.1.1. OUTPUT RATING
文件資料管制 文件資料管制 文件資料管制
3/10禁止翻印外洩 ESD11001280-R6.pdf 發行時間:2011/7/14 9:18 上午