Datasheet

4
3. PHYSICAL REQUIREMENTS
3.1 MECHANICAL SPECIFICATIONS
The mechanical drawing of the subject power supply, which indicate the form factor, location of
the mounting holes, location, the length of the connectors, and other physical specifications of the
subject power supply. Please refer to the attachment drawing.
3.2 CONNECTOR SPECIFICATIONS
The power supply connectors are:
AC Inlet : Standard inlet socket 10A/250V, UL/CSA/VDE approved.
P1 : The equivalent of MOLEX 39-01-2200, 20 pin connector.
PA,PC,PD : The equivalent of AMP 1-480424-0, 4 pin connector.
PB : The equivalent of AMP 171822-4, 4 pin connector.
PE : The equivalent of MOLEX 39-01-2040, 4 pin connector.
3.3 CONNECTOR PIN DESIGNATIONS
The pin designations and color codes are defined as follows:
P1
SYSTEM BOARD
PA,PC,PD
DISK DRIVER
PB
DISK DRIVER
PE
DISK DRIVER
PIN1 +3.3V ORANGE +12V YELLOW
+12V YELLOW
COM BLACK
PIN2 +3.3V ORANGE COM BLACK COM BLACK COM BLACK
PIN3 COM BLACK COM BLACK COM BLACK +12V YELLOW
PIN4 +5V RED +5V RED +5V RED +12V YELLOW
PIN5 COM BLACK
PIN6 +5V RED
PIN7 COM BLACK
PIN8 PW-OK GRAY
PIN9 +5Vsb PURPLE
PIN10
+12V YELLOW
+3.3V ORANGE
PIN11
+3.3VS
BROWN
PIN12
-12V BLUE
PIN13
COM BLACK
PIN14
PS-ON GREEN
PIN15
COM BLACK
PIN16
COM BLACK
PIN17
COM BLACK
PIN18
NC NC
PIN19
+5V RED
PIN20
+5V RED
文件資料管制 文件資料管制 文件資料管制
4/11禁止翻印外洩 ESD09081969-R9.pdf 發行時間:2011/6/23 10:56 上午