Product Manual

CAP881
- 8 -
Additional Safety information for Air Compressors
Like all power tools, there is danger associated with operating this equipment. Accidents are
frequently caused by lack of familiarity or failure to pay attention. Use this machine with
extreme caution. If normal safety precautions are overlooked or ignored, serious personal injury
may occur.
The following are some safety suggestions that users should observe:
Caution
- Users that neglect these safety precautions run the risk of serious injury or death.
- Fingers and clothing must be kept away from rotating parts.
- Compressed air from this machine cannot be used for pharmaceutical, food or health
requirements without further treatment.
- Release all pressure from the system prior to maintenance.
- Electric shock could be fatal.
- Grounding of starter and motor is necessary. Choose grounding cable according to
the power range of the compressor.
- Lockout and tagout power supply before working on control panel.
- Lockout and tagout power supply before inspection and maintenance - compressor is
controlled by PID and may start automatically according to the setting.
- Optional Dryer should be connected to separate 120V power source and follow
Lockout/Tagout procedures for inspection or maintenance.
Warning
- Users who neglect the following instructions may damage the compressor.
- Lockout and tagout the compressor if maintenance is needed.
- Lockout and tagout power supply before inspection and maintenance - compressor is
controlled by PID and may start automatically according to the setting.
- Optional Dryer should be connected to separate 120V power source and follow
Lockout/Tagout procedures for inspection or maintenance.
- Relief valve is necessary for air piping larger than 1/2”.
- Do not exceed the rated discharge pressure on nameplate during operation.
- The enclosure should be in place prior to operation