Product Manual

CAP881
35
6.6 Lubricant
Your compressor has been filled and tested with a high quality synthetic compressor lubricant. It has
the advantage of extended service life, high temperature operation, and easy start-up when cold, reduced
sludge and lacquer buildup, and is completely compatible with all seals, gaskets, and other compressor
materials.
When operating in severe conditions it will be necessary to change the lubricant more frequently.
Temperature of operation has the most significant effect on the life of the lubricant. The following
chart shows the decrease in interval based on temperature.
Discharge Temperature
FSC8000
Up to 180
o
F
8000 hrs
180 to 190
o
F
6000 hrs
190 to 200
o
F
4000 hrs
200 to 210
o
F
2000 hrs
To eliminate confusion concerning what type of lubricant to use, always use CurtisLubePlus FSC- 8000
Lubricants. If other lubricants are used, failures due to lubrication are not warrantable.
CAUTION
Plugged filters, coolers, and orifices can result from mixing different lubricants and
conditioners. This will also void the warranty.
Be sure to always use CurtisLubePlus FSC- 8000 in refilling your compressor.
Oil Analysis
Oil analysis is an excellent tool to add to your compressor maintenance program. At regular intervals,
submit lubricant samples to a qualified laboratory for analysis. You should receive a detailed report
showing the lubricant condition, wear metals, and contaminants. The rate that these measurements
change over time provides the basis for predictive compressor maintenance, saving you from unplanned
machine downtime and unnecessary oil changes. Order part number VO701-POL oil sample kit.
DANGER
Hot oil under pressure will cause severe injury, death, or property damage.
Be sure the compressor is shutdown and pressure relieved before attempting to
remove the oil filter, separator, filling oil, or changing the oil.