MSDS

FSC-8000 COMPRESSOR FLUID Page Number: 4
Exposure controls/personal protection8 .
Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator. Recommended: organic vapor filter
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
Eyes
Skin
Respiratory
:
:
:
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Recommended: neoprene, nitrile, polyvinyl alcohol (PVA), Viton®.
Hands :
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure they
comply with the requirements of environmental protection legislation. In some cases,
fume scrubbers, filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Not available.
Viscous liquid.
Not available.
Not available.
Not available.
0.861 kg/L @ 15°C (59°F)
Not available.
Not available.
Insoluble in water.
Not available.
Hydrocarbon.
Pale yellow.
Boiling/condensation point
Melting/freezing point
Not available.
47.2 cSt @ 40°C (104°F), 7.24 cSt @ 100°C (212°F), VI=114
Physical and chemical properties
Physical state
pH
Relative density
Vapor pressure
Vapor density
Volatility
Odor threshold
Evaporation rate
Viscosity
Solubility
Odor
Color
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Flash point :
Open cup: 253°C (487.4°F) [Cleveland.]
Fire Point: 271 °C (519.8°F)
:Auto-ignition temperature
Flammable limits :
Not available.
9 .
Pour point
-42°C (-44°F)
:
The product is stable.
Reactive with oxidizing agents, acids, alkalis and reducing agents.
Under normal conditions of storage and use, hazardous polymerization will not occur.
May release COx, methacrylate monomers, smoke and irritating vapours when heated to
decomposition.
Stability and reactivity
Chemical stability
Materials to avoid
Hazardous decomposition
products
Hazardous polymerization
:
:
:
:
10 .
Date of issue : 9/20/2012.
Page: 4/7