iCommand-Touch Manual

CAP-837
2.7.10 "SD -
Card" menu
All functions with access to the SD
The respective card must be inserted for usage.
2.7.10.1 Save parameters
The
Card without write protection.
2.7.10.2 Load parameters
The parameter set of SD
SD
Start and stop data logging
Fig. 57: "SD - Card" screen
This function starts data logging on the SD
without write protection. The following data is also written:

Time stamp

System state

Final temperature

Oil

Air quantity

State of all connected compressors (only on LLC)
Fig. 58: "SD - Card" screen
Pressure, air quantity and temperatures are saved in the display p
rameter set on the control (bar/psi/Mpa, m³/
are in the language that it is set. Per calendar day one file in csv fo
mat (delimiter symbol: tabulator) are created. The text of the button
changes from
(Fig.
ning data logging can be stopped.
iCommand
50
Card" menu
All functions with access to the SD
-
Card are located in this menu.
The respective card must be inserted for usage.
The
current parameter set is written on the SD -
Card. Insert a SD
Card without write protection.
The parameter set of SD
-
Cards can be read with this function. The
SD
- Card with the "ACPParam.par" must be inserted.
This function starts data logging on the SD
-
Card. Insert a SD
without write protection. The following data is also written:
Time stamp
System state
Final temperature
Oil
temperature
Air quantity
State of all connected compressors (only on LLC)
Pressure, air quantity and temperatures are saved in the display p
rameter set on the control (bar/psi/Mpa, m³/
ft³
, °C/°F/Kelvin). States
are in the language that it is set. Per calendar day one file in csv fo
mat (delimiter symbol: tabulator) are created. The text of the button
changes from
"Start data logging" (Fig. 57) to
"Stop data loggin
(Fig.
58
), if the data logging is activated. In this case, a currently ru
ning data logging can be stopped.
iCommand – Touch
iCommand
- Touch
Card are located in this menu.
Card. Insert a SD
-
Cards can be read with this function. The
Card. Insert a SD
- Card
without write protection. The following data is also written:
Pressure, air quantity and temperatures are saved in the display p
a-
, °C/°F/Kelvin). States
are in the language that it is set. Per calendar day one file in csv fo
r-
mat (delimiter symbol: tabulator) are created. The text of the button
"Stop data loggin
g"
), if the data logging is activated. In this case, a currently ru
n-