iCommand-Touch Manual

ManualsBrandsFS-Curtis ManualsRotaryNxB-4 5-HP Tankless Rotary Screw Air Compressor w/ iCommand-Touch Controller (230V 1-Phase 150PSI)

CAP-837

Fig. 51: "LLC configuration" screen

(Part 1/2)

Fig. 52: "LLC configuration" screen

(Part 2/2)

Parameter

Value setting/Initial setting/Remarks

Lead lag control

Indicates if and how the communication for

function should be done (or if a LLC module is avai

able).

Setting range:



No (no LLC)



Digital (LLC via expansion module)



RS485 (LLC via RS485 connection)



When selecting "Digital" a LLC module is

expected at address 2

Initial setting: No

Baud rate Baud rate

for communication on LLC via RS485

Setting range: 4800 / 9600 / 19200 / 38400 / 57600 /

115200

Initial setting: 19200

Change immedi-

ately

Specifies if the LLC series rotates immediately after

the change interval is completed (recommended) or

only when the switch

reached. Warning: If No, the change interval can be

iCommand

Individual settings (e.g. switch-on times, switch-

off and change inte

vals) can be set in the "LLC configuration" (Fig.

Using the

button the second part of the menu can be screen

(Fig. 52) accessed.