iCommand-Touch Manual

CAP-837
Parameter
Value setting/Initial setting/Remarks
ture flow diagram.
Setting ra
nge: Temperature graph low
Initial setting: 212 °F
Air flow Y-axis low
Specifies the lower limit of the Y
the double arrow button (Y
flow diagram.
Setting range: 0
Default setting: 0
Air flow Y-axis
high
Specifies the upper limit of the Y
the double arrow button (Y
flow diagram.
Setting range: Air flow Y
Initial setting: Max. air volume of the currently selec
ed system
2.7.4.7 "Texts" screen
Fig. 36: "Texts" screen (Part 1/2)
Fig. 37: "Texts" screen (Part 2/2)
iCommand
35
Value setting/Initial setting/Remarks
Compressor
type
ture flow diagram.
nge: Temperature graph low
– 302 °F
Initial setting: 212 °F
Specifies the lower limit of the Y
-axis after actuating
the double arrow button (Y
-restore) in the volume
flow diagram.
Setting range: 0
ft³t – Air flow Y-axis high
Default setting: 0
ft³
All
Specifies the upper limit of the Y
-axis after actuating
the double arrow button (Y
-restore) in the volume
flow diagram.
Setting range: Air flow Y
-axis low – 2354 cu ft³³
Initial setting: Max. air volume of the currently selec
t-
All
This menu contains text about the type plate.
Using the (Fig. 35
/1) button the second part of the menu can be
accessed.
iCommand – Touch
iCommand
- Touch
Compressor
State
Editable
Editable
/1) button the second part of the menu can be