iCommand-Touch Manual

CAP-837
2.7.3.2 "Counter" menu
Parameter
Value setting/Initial setting/Remarks
Operating hours
Operating hours (Motor on)
Setting range: 0
–
Initial setting: 0 h
On-load hours On-
load hours counter (Motor on, load valve open)
Setting range: 0 -
Initial setting: 0 h
Ready hours
Ready hours counter (System on, motor off)
Setting range: 0
–
Initial setting: 0 h
Total delivery
volume
From the maximum air volume of the compressor and
the on-
load hours calculated air quantity of the co
pressor.
Setting range: 0
–
Initial setting: 0 ft³
iCommand
29
This menu contains the following parameters:
Value setting/Initial setting/Remarks
Compresso
r type
Operating hours (Motor on)
–
999999 h
All
load hours counter (Motor on, load valve open)
Operating hours
All
Ready hours counter (System on, motor off)
–
999999 h
All
From the maximum air volume of the compressor and
load hours calculated air quantity of the co
m-
–
999999999 ft³
Initial setting: 0 ft³
All
iCommand – Touch
iCommand
- Touch
Compresso
State
Display
Display
Display
Display