iCommand-Touch Manual

CAP-837
2.6.3
Access to the menu system code 1
Parameter input
Fig. 21
: "Control" screen (can be
changed)
Fig. 22: "Control" screen
iCommand
23
Access to the menu system code 1
: "Control" screen (can be
When accessing the menu system with code "1" settings are
available in the controller. If a code is entered, all values
highlighted in white (Fig. 21
) and can be changed by selection
on the individual buttons. For example, i
button is selected in the "Control" screen, then the submenu is
reached (Fig. 22
), in which the stop pressure can be set.
1 Input field
2 Display of
the setting range
3
Display of the default settings
A keypad appears in the submenu and numeric parameters can
be set. It appears as soon as a value is entered. Left at the
edge the possible setting range, the default setting as well as a
brief explanation text is displayed.
After input the new value can be accepted or deleted:
Accept input and leave
Correct input
Discard input and close input page
iCommand – Touch
iCommand
- Touch
When accessing the menu system with code "1" settings are
available in the controller. If a code is entered, all values
are
) and can be changed by selection
on the individual buttons. For example, i
f the "Cut-out pressure"
button is selected in the "Control" screen, then the submenu is
), in which the stop pressure can be set.
the setting range
Display of the default settings
A keypad appears in the submenu and numeric parameters can
be set. It appears as soon as a value is entered. Left at the
edge the possible setting range, the default setting as well as a
After input the new value can be accepted or deleted: