iCommand Manual
CAP-836 
Information on these operating instructions
These  instructions  enable  you  to  use  the  machine 
safely  and  efficiently.  The  instructions  are  a 
component  part  of  the  machine  and  must  be 
accessible for staff at all times. 
Staff  must  have  carefully  read  and  understood 
the
se instructions before starting all work. The basic 
prerequisite  for  safe  working  is  compliance  with  all 
the  safety  instructions  and  instruction  for  actions 
included in these operating 
instructions.
The local occupational health and safety regulations 
and general safety rules  for operational  area of the 
machine also apply. 
The  instructions  for  the  machine  do  not  cover 
operation  of  the  controller.  Therefore,  the 
instructions  and  content  o
f  the  instructions  for  the 
controller  in  question  must  also  be  taken  into 
account. 
Copyright 
These  instructions  are  protected  by  copyright  and 
for internal purposes only. 
These  instructions  must  not  be  made  available  to 
third  parties,  rep
roduced  in  any  way 
 even excerpts - 
and  the  content  must  not  be 
utilized  and/or  communicated,  except  for  internal 
purposes,  without  the  written  permission  of  the 
manufacturer. 
Any  infringement  shall  be  subject  to  compensation 
for damages. We reserve the r
ight to assert further 
claims. 
General information
3 
Information on these operating instructions
These  instructions  enable  you  to  use  the  machine 
safely  and  efficiently.  The  instructions  are  a 
component  part  of  the  machine  and  must  be 
Staff  must  have  carefully  read  and  understood 
se instructions before starting all work. The basic 
prerequisite  for  safe  working  is  compliance  with  all 
the  safety  instructions  and  instruction  for  actions 
instructions.
The local occupational health and safety regulations 
and general  safety rules  for operational  area of the 
The  instructions  for  the  machine  do  not  cover 
operation  of  the  controller.  Therefore,  the 
f  the  instructions  for  the 
controller  in  question  must  also  be  taken  into 
These  instructions  are  protected  by  copyright  and 
These  instructions  must  not  be  made  available  to 
roduced  in  any  way 
-
and  the  content  must  not  be 
utilized  and/or  communicated,  except  for  internal 
purposes,  without  the  written  permission  of  the 
Any  infringement  shall  be  subject  to  compensation 
ight to assert further 
Limitation of liability 
All information and instructions in this manual have 
been  compiled  taking  account  of  the  applicable 
standards  and  regulations,  state
technology  and  our  years
experience. 
The manufacturer assumes no liability for damages 
caused by: 
 
failure to adhere to these instructions
  improper use 
  use of unqualified staff
 
unauthorized conversions
  technical modifications
  use of non-
approved spare 
The  actual  scope  of  supply  may  differ  from  the 
descriptions and illustrations in these instructions in 
the  case  of  special  designs,  the  inclusion  of 
additional  ordering  options  or  as  a  result  of  the 
latest technical modifications.
The obligations 
agreed in the contract of supply, the 
manufacturer's  general  terms  and  conditions  of 
business  and  delivery  and  the  legal  regulations 
valid at the time of completion of the contract apply.
Customer service 
Our  Customer  Service  depa
provide technical information.
In addition,  our employees are  always interested in 
receiving  new  information  and  hearing  of  your 
experiences from usage which could be valuable for 
the improvement of our products.
General information
All information and instructions in this manual have 
been  compiled  taking  account  of  the  applicable 
standards  and  regulations,  state
-of-the-art 
technology  and  our  years
  of  knowledge  and 
The manufacturer assumes no liability for damages 
failure to adhere to these instructions
unauthorized conversions
approved spare 
parts 
The  actual  scope  of  supply  may  differ  from  the 
descriptions and illustrations in these instructions in 
the  case  of  special  designs,  the  inclusion  of 
additional  ordering  options  or  as  a  result  of  the 
latest technical modifications.
agreed in the contract of supply, the 
manufacturer's  general  terms  and  conditions  of 
business  and  delivery  and  the  legal  regulations 
valid at the time of completion of the contract apply.
Our  Customer  Service  depa
rtment  is  available  to 
provide technical information.
In addition,  our employees are  always interested in 
receiving  new  information  and  hearing  of  your 
experiences from usage which could be valuable for 
the improvement of our products.










