iCommand Manual

CAP-836
2.7
Setting parameters via code input menu
2.7.1
Calling up th
2.7.2
Overview of code input menu
Fig. 6: Code input menu
iCommand
17
Setting parameters via code input menu
The parameters for all basic settings of the compressor can be changed
with code input as long
as these changes do not influence the
operational stability. However, this is only possible when the
compressed air generation is switched off.
Calling up th
e code input menu
1.
Press and hold for three seconds.

The code input menu appears on the display.
2.
Press .

A 1 appears on the display.
3.
Press .
In order to exit the code input menu again, press the
key.
Overview of code input menu
1 Currently-
set code (flashing, can be changed with the
iCommand
- Basic
The parameters for all basic settings of the compressor can be changed
as these changes do not influence the
operational stability. However, this is only possible when the
The code input menu appears on the display.
In order to exit the code input menu again, press the
set code (flashing, can be changed with the
keys)