Product Manual

Maintenance
CAP-834
34
Environmental protection
Observe the following environmental protection
instructions during maintenance work:
 In respect of all lubrication points supplied
manually with lubricant, remove any escaping,
used or surplus grease and dispose of in
accordance with applicable local, state and
federal regulations.
 Catch replaced oils in suitable containers and
dispose of in accordance with applicable local,
state and federal regulations.
7.2 Spare parts
WARNING!
Risk of injury due to using wrong
spare parts!
Using incorrect or faulty spare parts
brings dangers to the personnel and
can cause damages, malfunctions or
complete failure.
- Only use genuine spare parts
supplied by the manufacturer or
manufacturer-approved spare parts.
- If in doubt, always contact the
manufacturer.
Loss of warranty
The use of non-approved
spare/replacement parts will invalidate
the warranty.
Procure replacement parts from authorized dealers
or directly from the manufacturer.
Please refer to the Parts list for accurate part num-
ber information.
7.3 Maintenance schedule
The next sections describes the maintenance work
that is required for optimal and fault-free operation
of the machine.
Insofar as increased wear can be detected during
regular checks, the required maintenance intervals
must be shortened according to the actual signs of
wear. For questions about maintenance work or
intervals contact the manufacturer.