Product Manual

Transportation, packaging and storage
CAP-834 23
Fragile
Marks packages with fragile or sensitive contents.
Handle the package with care; do not allow to fall
and do not expose to impacts.
Protect against moisture
Protect packages against moisture and keep dry.
4.5 Transportation
Transportation with a fork lift
Packages can be transported with a fork lift under
the following conditions:
 The fork lift must be engineered for the weight of
the packages.
 Existing guide rails on the frame must be used.
 The length of the forks must be at least 55 inch
(1400 mm).
Transporting
Fig. 21: Transportation with a fork lift
1.
Drive the fork lift with the forks as shown in
Fig. 21.
2.
Insert the forks so that they stick out on the oth-
er side.
3.
Ensure that the package cannot tip if the centre
of gravity if off-centre.
4.
Lift the package and begin transportation.
4.6 Storage
Storage of the packaged compressor
Store the compressor under the following condi-
tions:
 Do not store outdoors.
 Store dry and dust-free.
 Do not expose to any aggressive media.
 Protect against solar radiation.
 Avoid mechanical jolts.
 Storage temperature: 60 to 95F (15 to 35 °C).
 Relative humidity: max. 60 %.
 In case of storage for longer than 3 months,
check the general condition of all parts and the
packaging regularly. If necessary, refresh or
replace the rust-proofing.
Under some circumstances there may
be notes about storage on the
packaging that extend beyond the
requirements named here. Adhere to
these accordingly.