iCommand-Touch Manual

CAP-837
2.7.5.1
"MK200 modules" screen
Overview
Fig. 42: "MK200 modules" screen
Parameter
Value setting/Initial setting/Remarks
MK200 Profibus
Specifies if a Profibus is triggered on the MK200
module. Set address: 31.
Setting range: Yes/No
Initial setting: No
MK200 Accesso-
ries
Specifies if the expansion module on the MK200
module is being considered. The assignment of the
digital inputs and outputs of up to two accessory
modules of type 8E4RA can be selected via the
figuration

possible
freely selectable functions. Addresses: 4
and 5
Setting range: Yes/No
Initial setting: No
Number of ext.
module
Amount of expansion modules connected to the
MK200 module bus. Addresses 8 to 30
Setting range: 0
Initial setting: 0
iCommand
39
"MK200 modules" screen
Different MK200 modules can be connected to the RS485 bus. Here,
each model
must have its own address and each address must only
occur once. In principle 32 participants are possible. Whether the
ICOMMAND -
TOUCH establishes a communication to a module and
monitors a fault of a module depends on the settings in this menu.
Value setting/Initial setting/Remarks
Compressor
type
Specifies if a Profibus is triggered on the MK200
module. Set address: 31.
Setting range: Yes/No
Initial setting: No
All
Specifies if the expansion module on the MK200
module is being considered. The assignment of the
digital inputs and outputs of up to two accessory
modules of type 8E4RA can be selected via the
Con-

Inputs/outputs submenu from a list of
freely selectable functions. Addresses: 4
Setting range: Yes/No
Initial setting: No
All
Amount of expansion modules connected to the
MK200 module bus. Addresses 8 to 30
Setting range: 0
– 23
Initial setting: 0
All
iCommand – Touch
iCommand
- Touch
Different MK200 modules can be connected to the RS485 bus. Here,
must have its own address and each address must only
occur once. In principle 32 participants are possible. Whether the
TOUCH establishes a communication to a module and
monitors a fault of a module depends on the settings in this menu.
Compressor
State
Display
Display
Display