iCommand-Touch Manual

CAP-837
Buttons in the basic display
Fig. 4: "Basic display" screen
"Pressure" screen
Fig. 5: "Pressure" screen
Fig. 6: "Pressure" screen
"Temperature" screen
Fig. 7: "Temperature" screen
iCommand
17
Buttons in the basic display
The buttons in
the basic display are allocated as follows:
 "Pressure" (Fig. 4
/1) button to open the "Pressure" screen
 "Temperature" (Fig. 4
/2) button to open the "Temperature"
screen
 "State" (Fig. 4
/3) button to open the "State" screen
 "Graphics" (Fig. 4
/4) button to open the "Graphics" screen
 "Menu" (Fig. 4
/5) button to open the "Menu" screen
The current measured value of the pressure sensor is displayed
in the "Pressure" screen. A tap on the
"Pressure"
ically displays the pressure.
All pressure values o
f the entire system are compiled on the ot
er pages (scrolling is done using the arrow key).
The current measured value of the final compressor temperature
is displayed in the "Temperature" screen. A tap on the
ture"
button graphically displays the temperature course. All te
perature values of the entire system are compiled on the other
pages (scrolling is done using the arrow key).
iCommand – Touch
iCommand
- Touch
the basic display are allocated as follows:
/1) button to open the "Pressure" screen
/2) button to open the "Temperature"
/3) button to open the "State" screen
/4) button to open the "Graphics" screen
/5) button to open the "Menu" screen
The current measured value of the pressure sensor is displayed
"Pressure"
button graph-
f the entire system are compiled on the ot
h-
er pages (scrolling is done using the arrow key).
The current measured value of the final compressor temperature
is displayed in the "Temperature" screen. A tap on the
"Tempera-
button graphically displays the temperature course. All te
m-
perature values of the entire system are compiled on the other
pages (scrolling is done using the arrow key).