iCommand Manual

CAP-836
2.8
Fault and warning messages
2.8.1
Fault message
Fig. 9: Fault message
iCommand
30
Fault and warning messages
Fault message
When a fault occurs, the compressor switches off and it
can only be switched on again after the cause of the fault
has been eliminated. Subsequently, the fault message
must be acknowledged with the
1 Fault abbreviation
2 Fault number
3 Fault symbol
If a fault occurs during operation, a fault message (Fig.
symbol
appear on the display. If a fault occurs, the compressor
switches off.
iCommand
- Basic
When a fault occurs, the compressor switches off and it
can only be switched on again after the cause of the fault
has been eliminated. Subsequently, the fault message
key.
If a fault occurs during operation, a fault message (Fig.
9
) and the fault
appear on the display. If a fault occurs, the compressor