iCommand Manual

CAP-836
2.7.5
Select operating mode: Code 0002
iCommand
20
Select operating mode: Code 0002
By entering the code 0002, the operating mode can be selected.
1.
Press and hold for three seconds.

The code input menu appears on the display.
2.
Press .

A 1 appears on the display.
3.
Press .
4.
Set the code 0002 with the keys.
5.
To confirm the selected code, press .
6.
Press .

The submenu for setting the operating mode appears on the
display.
7.
There are three
values from which to choose:
- 0: Automatic operation
- 1: Load/idle operation
- 2: Optional automatic
Set the desired value with the keys.
8.
To confirm the selected value, press .

The set value is saved and the code
input menu appears on
the display again.
9.
Press
again to go back to the basic display.
Value Operating
mode
Description
0
Automatic
operation
After reaching the switch-
off pressure, the
compressor switches to idle for
the idle time (run-
on). After the idle time has
elapsed, the compressor then switches off, but it
remains ready for operation. If the switch
pressure is reached, the compressor starts up
again automatically.
1
Load/idle
operation
The
compressor switches between "Load" and
"Idle" operation; i.e. there is an unlimited run
iCommand
- Basic
By entering the code 0002, the operating mode can be selected.
The code input menu appears on the display.
The submenu for setting the operating mode appears on the
values from which to choose:
input menu appears on
again to go back to the basic display.
off pressure, the
compressor switches to idle for
the duration of
on). After the idle time has
elapsed, the compressor then switches off, but it
remains ready for operation. If the switch
-on
pressure is reached, the compressor starts up
compressor switches between "Load" and
"Idle" operation; i.e. there is an unlimited run
-on.