iCommand Manual

CAP-836
2.4.2
Operating mode display
The following text/symbols can appear on the
2.5
Switching the compressor on/off
Switching the compressor on
Switching the compressor off
iCommand
14
Operating mode display
The following text/symbols can appear on the
Operating mode display:
Symbol Description
Operating mode automatic/optional automatic active.
If the compressor is in load/idle operation, nothin
shown on the Operating mode
display.
Switching the compressor on/off
1.
Press .

The integrated green LED lights up.
1.
Press .

The green LED in the key goes out.
During the switch-
off process, the compressor initially
switches to "Off load" (motor running, however the
compressor
is not compressing any air; a counter
appears on the screen) for the duration of the off time.
Only then does the compr
essor switch off (the motor
stops).
iCommand
- Basic
Operating mode automatic/optional automatic active.
If the compressor is in load/idle operation, nothin
g is
display.
off process, the compressor initially
switches to "Off load" (motor running, however the
is not compressing any air; a counter
appears on the screen) for the duration of the off time.
essor switch off (the motor