Spec Sheet

File Name CAP522
Date Apr. 20, 2013
Rev. A
FS-CURTIS, CURTIS-TOLEDO, INC x 1905 Kienlen Avenue, St. Louis, Missouri 63133 x +1 [phone] x Fax [phone]
www.fscurtis.com
ML10 DUPLEX
TECHNICAL DATA
Capacity and power: ISO-1217(1996 annex #C)
Normal working pressure - psi 175
Capacity at normal working press - cfm 79.6
Basic Pump
Model D97A
Stage 2
Lubrication type Centro-Ring Pressure lubrication
Valve type Disc Valve
RPM (min – max) – rpm 500 - 800
Outfit RPM 600
BHP – HP 9.34
Bore (LP/HP) – inch 6.25” – 3.375”
Stroke – inch 3.75”
Inlet size 1 1/4" NPT
Discharge size 1 1/4" OD
Sheave OD 17.875”
Sheave PD 17.52”
Number of belts 3
Belt section B
Low oil sight glass N/A
Oil quantity 5 Pints Each
Unloaders and Method Suction Head
Noise level – dB(A) 82
Moto
r
3-200V 3-230V 3-460 3-575V
Enclosure
IP23 IP23 IP23 IP23
Insulation Class
F F F F
Efficiency - %
89.5
91.7 91.7 91.7
Nominal rated power – HP
10
10 10 10
Speed of rotation - rpm
1765
1770 1770 1770
FLA
30.8
25.0 12.5 10.0
Service factor
1.15
1.15 1.15 1.15
Locked rotor current – A
218
168 84 67
Power Factor 78 82 82 82
Installation condition
Allowed ambient temperature min - max - °F
32-104
Compressor dimensions
Air Receiver Type Horizontal Horizontal UP
Air receiver size (Gal) 200 200
Compressor outlet 1” NPT 1” NPT
Length – inch 88 90
Width – inch 32 37
Height – inch 64 64
Weight – Lbs. 1800 1950
Air Cooled Aftercooler (Option)
Availability Yes
Air cooled aftercooler CTD - °F
18
Remark:
1. Capacity (FAD) measured in accordance with ISO 1217, Ed 3, Attachment C 1996, Ref. condition: Dry air, suction pressure 1 bar.
2. Sound Pressure Level in accordance with ISO 2151, edition 2004 with a tolerance of 3dB(A).
3. Due to continuous product development at FS-CURTIS, design and specifications are subject to change without notice.