Spec Sheet

5
CT SerieS aiR compRessoRs
W
H
GAS-DRIVEN COMPRESSORS
Standard Features
• Heavy-duty 100% cast-iron pump
construction for dependable operation
• Slow speed design for extended life
• OSHA-approved totally enclosed
metal belt guard
• ASME-approved air receiver
• 12V DC starter with alternator
• Engine idle control
• ASME-approved discharge valve
SIMPLEX COMPRESSORS
Standard Features
• Magnetic motor starter
• Cast-iron 2-stage pump built to ISO 9001 standards
(except for 230/1 CT5 units equipped with motor
thermal overloads)
• Slow speed pump with V-belt drive
• Rugged NEMA motor with UL-approved
electric design
• ASME air tank
• OSHA-approved totally enclosed metal belt guard
• UL-approved pressure switch
• Automatic start-stop control
• Metal intake lter/silencer
• Manual tank condensate drain valve
• Dial read-out pressure gauge
• Loadless starting
• ASME-approved safety valve
• ASME-approved discharge valve
• Factory oil lled
L
eleCTriC modelS
MODELS HP PUMP
CFM
(@175psi)
CONFIGURATION
TANK
(Gal.)
DIMENSIONS
(LxWxH-In.)
WEIGHT
(Lbs.)
CT5*
5 CT55 15.9 Vertical 60 34 x 24 x 73 475
CT5*
5 CT55 15.9 Vertical 80 33 x 27 x 73 515
CT5
5 CT55 17.8 Vertical 80 33 x 27 x 73 515
CT7.5
7.5 CT75 24.2 Vertical 80 36 x 27 x 74 573
CT10
10 CT75 29.7 Horizontal 120 74 x 25 x 53 833
*Note the CT5 units, which are equipped with motor thermal overloads, do not require a mag starter
GaS-driven modelS
MODEL HP ENGINE PUMP
CFM
(@175psi)
TANK
(Gal.)
DIMENSIONS
(LxWxH-In.)
WEIGHT
(Lbs.)
CT13-H
13 Honda CT75 24.8 30 42x21x45.5 463
CT14-K
14 Kohler CT75 25.4 30 42x21x45.5 478
TeChniCal
daTa