3000 Controller

1-1
CHAPTER 1: 3000 CONTROLLER INSTRUCTIONS
1.1 Using the 3000
ON/OFF
 Press ON/OFF button. Fryer begins melt cycle to slowly heat solid shortening to programmed temperature before
switching to full temperature and heating to setpoint or idle temperature and displays: COOL or DROP.
 Exit melt cycle, when using liquid oil, by pressing and releasing the Exit Cool button or any programmed product button.
Displays show Exit Melt? on left and YES NO on the right. Press  to exit.
Cooking
 Fryer displays COOL or DROP
 COOL display: Press product button; fryer heats to setpoint and displays DROP.
 DROP display: Press product button and drop product.
 ** display: The vat temperature is out of the drop zone.
 DONE display: Press blinking product button to cancel alarm and end a cook.
 Cancel a Cook: Press and hold blinking product button to cancel cook cycle.
 HOLD display: Press blinking product button to cancel hold alarm.
Change setpoint: Press a product button at the desired temperature. Press the product button again and a cook starts.
NOTE: When a product with a different setpoint is chosen while a product is chosen a low tone is heard and the setpoint or
cook won’t start until the cook is finished.
Responding to Polish Prompt
 Controller displays Polish Now, alternating with Yes No.
 Press Yes (button under Yes display) and the polish cycle launches.
Controller displays Cool after polish cycle
.
Controller Button Navigation
 Product: Press to start a cook cycle. Active when adjacent LED is lit. LED flashes during a cook cycle. Press and hold
to cancel a cook cycle. Press at end of cook cycle to cancel an alarm. Press and hold a product with different setpoint
(approximately three seconds) until it beeps to change setpoint temperature.
 Scan/Exit: Press once, all product buttons are lit; Select Product displayed. Press product button to view product name.
Press Scan again to repeat. Press Scan twice to return to normal operation. Press scan to exit menus.
 Left/Right Arrows: Navigate options in left display. Press both simultaneously to start a polish cycle.
 Up/Down Arrows: Navigate options in right display. Press both simultaneously to change to a second language if one
is selected in setup.
 Exit Cool: Exits cool mode, returns fryer to setpoint temperature. Press to exit melt during melt cycle.
 Thermometer: Fryer ON: Press and release for setpoint in left display and vat temperature in right display.
 Thermometer, Fryer OFF: Press to display temperature, time, date, system version, controller and circuit board
software versions.
 Checkmark: Fryer OFF: Press and hold 3 seconds: Scroll filter usage; Press and hold 10 seconds: Product setup.
 Checkmark: Fryer ON: Enter Codes, Respond to left display prompts.
 Filter: Press and release: Cooks remaining to filter cycle. Press and hold: Filter options: Filter, Clean and Filter,
Dispose, Fill Vat from Bulk (Bulk option only) and Boil Out (OFF only).