M2000 Computer Operation Manual

Programming New Menu Items
6-1
Adding New
Menu Items
1. Computer displays OFF (Computer must be off to enter
programming mode.)
2. Press
3. Code appears in left display
4. Press
1
6
5
0
(1650) with product keys.
5. Use the
2
to advance through menu items until the display
reads Prod 8 or a higher number.
6. Press and right display will read EDIT. The first character
in the left display will flash.
7. Use
1
ABC
keys to enter name of the product. Each key can display
one of three letters. Press the key labeled with the needed letter
until that letter appears.
8. Press
2
to advance cursor. Use the #0 key to insert a space.
9. For example to enter “WINGS”, press the #8 product key until w
appears in the display.
10. Use the
2
to advance the cursor to the next display space.
Press the #3 key until I appears. Continue until WINGS is
spelled out on display.
11. Press .
12. A P flashes and a number is displayed. Use steps 7-10 to enter
an abbreviated name for the menu item. The shortened name will
alternate with the cook time during a cook cycle.
13. Press . The newly entered product name appears on left.
14. Choose and press a product button, if desired, to store the cooking
cycle for the new product. The LED in the chosen product button
will illuminate. The right display is blank.
Enter product
name.