Burger King 1814 Computer Operation Manual Frymaster, a member of the Commercial Food Equipment Service Association, recommends using CFESA Certified Technicians. JUL 10 www.frymaster.
NOTICE TO OWNERS OF UNITS EQUIPPED WITH COMPUTERS U.S. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. While this device is a verified Class A device, it has been shown to meet the Class B limits.
BK 1814 Computer 1-1
BK 1814 Computer 1-2
Programming New Menu Items in Multi Product Computer Follow these steps to enter a new product in the computer. The actions to be taken are in the right column; the computer displays are shown in the left and middle columns. Left Display Right Display OFF Press 9 Enter 5050 with numbered keys. OFF 1 YES Press 9 Enter 1650 with numbered keys. Press lane key B (Blue) to advance cursor, Y (yellow) key to go back. Press key to advance to desired position. Number and Yes Press Ã.
Programming New Menu Items in Multi Product Computer Assigning Products to Menu Keys Left Display Right Display Action OFF Press 9. CODE Enter 1650 with numbered keys. Menu items YES Desired menu item YES Press B (Blue) key to advance through menu items. Press key to be used to cook product. Note: This eliminates any previous link associated with the chosen key. Product name Number YES Press (power key).
Left Display Right Display Action REMOVE M 2:35 REMOVE Your settings QUAL M QUAL SENS Your Settings 0 SENS Your setting Enter cook time in minutes and seconds with numbered keys. Press à to toggle between auto and manually cancelling alarm. Press 9. Enter time product can be held after cooking. Press à to toggle between auto and manually cancelling alarm. Press 9. Sens allows the fryer controller to adjust cooking times slightly, ensuring small and large loads cook identically.
Computer Codes Left Display CODE Right Display OFF Action Press D Enter • 1650: Add or edit menus • 1656: Setup, change energy source • 3322: Reload factory default settings • 5000: Displays total cook cycles. • 5005 Clears total cook cycles. • 5050: Sets unit to multi-product. • 5060: Sets unit to French Fries.
THIS PAGE INTENTIONALLY LEFT BLANK
Frymaster, L.L.C.
