User Guide

Coupler Measurements 87
Figure 3.8.8B—Using the Telewand
3.9 Reference
This section contains specific information on the function of each of the func-
tion keys, and the function of each available menu item.
The menu system in the Coupler Multicurve Mode has been divided into three
different screens: the Primary Menu, the Advanced Menu, and the Custom
Menu. The Primary Menu contains the most basic selections; things you may
want to change frequently. The Advanced Menu contains more advanced fea-
tures that you will only need to access occasionally. The Custom Menu is for
advanced users only – most people will probably not need to use it.
3.9.1 Defining the Function Keys
The following describes the function of each key in the Coupler Multicurve
screen.
[F1]—Clears curves. Pressing it once deletes the current curve. Pressing it again
will delete all curves.
[F2]—Cycles through the curve designations: 1, 2, 3, and 4.
[F3]—Turns the display of the selected curve ON and OFF. It doesn’t delete the
curves.
[F4]—Selects source type. Choose between NORM, SHORT, FAST, LONG,
COMP, DIG SPCH. The last two are available only if you have the Composite
Option.
[F5]—Levels the sound chamber.