User Guide

Attaching the light cord:
Assemble lantern as directed above. Once the lantern is assembled, press the light cord just above the
bulb into the cord guide with bulb point into the lantern (figure 4).
If your Lunaxia 24 String Lantern Lights do not turn on initially please try the following Troubleshooting
techniques:
1. Check your light string connection to the wall plug in. The wall plug in will have a little white tab as well
as prong holes. Match the light string cord up with the prong holes and be sure the inner tab also
matches the slot on the inside of the light string cord secure the connection with the screw cap located at
the end of the Lunaxia light string.
2. Once you have confirmed the wall plug is connected correctly please test your lights. If they do not
respond to the remote they may need to be calibrated. To do this simply take your remote control and
control box located on the lights string have the remote pointed directly at the control box and press the
button marked "Press" while at the same time holding down the On button located on the remote.