User Manual

Host clean
Clean soft cloth can be used, which can be
soaked in clean water, wrung out and then
wiped; Do not use alcohol, paint thinner,
gasoline or nail polish remover for cleaning.
Atomization plant cleaning
1. The Atomization plant can be removed and washed separately.
2. If there is scale, pour lemon juice into the Atomization plant, soak it until the
scale. disappears, and then wash it repeatedly with water.
3. Please completely dry in the shade before assembling.
1. The cleaned host should be thoroughly dried and stored in an environment that meets the storage conditions.
Storage conditions: temperature+5℃ ~+45℃; Relative humidity ≤80%RH. Keep away from light, well ventilated, no corrosive gas and away
from heating devices and open flames.
2. During storage, the host should be prevented from falling and bumping, and the host should be prevented from bending for a long time.
3. Do not wrap the power cord around the host during storage.
4. If you don't use it for a long time, it is recommended to remove the eye care solution from the atomizing device, clean it and store it again
to avoid bacteria.
5. The battery should be charged regularly after long-term storage to avoid shortening the service life of the battery; When using again,
charge the battery first, and clean the atomizing device before using.
Matters need attention
1. Please store it out of the reach of children.
2. Do not store or use the product in the bathroom or shower room or other high-temperature and humid environment.
3. In case of abnormal phenomenon or failure, please stop using it immediately, disconnect the power supply and contact the after-
sales service. Do not modify or repair it without permission.
Or abnormal condition:
Equipment, adapter or charging cable is deformed or abnormally hot.