User Manual
The eye care bottle
is on it
The eye
care bottle
The eye
care bottle
Atomization
plant
Take out the [Atomization plant] from the accessory box and take one [fruit eye care solution];
Pull off the upper cover of care solution, open the bottle cap of care solution, install the care soulution on
the Atomization plant and insert them tightly (be careful not to turn the bottle mouth of nursing solution
upside down during installation);
Install the atomization plant with care solution vertically on the host, The eye care bottle is on it, and
there is obvious magnetic attraction for correct installation.
* After the eye care solution is used up, you can refer to Step 6 to replace it, or you can use it by cleaning the empty
bottle and adding mineral water. Please be careful not to add other liquids to avoid equipment damage.
Step 1: Install the eye care solution & atomization device.