USER’S MANUAL Smart Steam Eye Massager ECP-04
1. In order to make you use this product correctly and safely, please be sure to read the"instruction manual". We will not bear any legal responsibility and related expenses for the consequences caused by not using this product according to the relevant instructions. 2. This product is a personal care massage product and cannot be used for diagnosis, treatment and other commercial purposes. 3.
-Feeling unwell and having a fever -Skin damage, redness, inflammation, eczema or excessive sunburn 8. The following people should consult a doctor before using this product: -Myopia over 800 degrees -Just had laser eye surgery. -floaters 9. The following people should not use this product: -Allergic constitution -Skin diseases or atopic dermatitis -Pregnant women (skin discomfort and other problems may be caused by hormonal imbalance) 10.
Preparation before use 1. In order to make this product light and thin, an external power supply and an independent and detachable steam spraying device are adopted. Therefore, [Battery] and [Atomization plant] should be installed before use, so that it can be turned on and used with "steam function". 2. Please use [Fruit Eye Care Soulution] or mineral water, other liquids may cause product damage. 3. Please take off contact lenses, glasses, etc. before use.
Atomization plant The eye care bottle The eye care bottle is on it The eye care bottle Step 1: Install the eye care solution & atomization device.
Press and hold Light Step 2：Install Battery Take out the [battery] from the accessory box and install it at the battery interface of the host computer. If there is obvious magnetic attraction, the installation is correct. Step 3：Power-on Press and hold the“ ”for 3 seconds, and the voice prompt will sound. Please refer to step 5 for details.
[Boot] After installing the battery , press and hold " "for 3 seconds, and the product will be turned on. [Mode switching] Click " "to switch modes, They are "eye protection mode, soothing mode and sleeping mode". There is no massage in sleeping mode. [Atomization] Install the eye care solution and Atomization plant, and the atomization will be turned on automatically after startup, and the "Steam quantity" will be adjusted in the App.
1. This product uses a rechargeable lithium battery. Please use the equipped charging cable to charge it. The selected power adapter shall conform to the national standard. Rated voltage: 5V Rated power: 5W Charging time: about 1.5 hour 2. When using the product for the first time or for long-term reuse, the battery should be fully charged before use. 3. It is normal for the battery and adapter to heat up slightly during charging. 4.
Host clean Clean soft cloth can be used, which can be soaked in clean water, wrung out and then wiped; Do not use alcohol, paint thinner, gasoline or nail polish remover for cleaning. Atomization plant cleaning 1. The Atomization plant can be removed and washed separately. 2. If there is scale, pour lemon juice into the Atomization plant, soak it until the scale. disappears, and then wash it repeatedly with water. 3. Please completely dry in the shade before assembling. 1.
Burning smell from equipment, adapter or charging cable. The equipment, adapter or charging cable makes abnormal sound during use or charging. 4. In case of any abnormal phenomenon during use, please follow the "Troubleshooting Table" to solve it first. If it still can't work, please contact the after-sales unit. Keep shut down the power off No charging Low battery: Reminder for charging. Others: Please contact after-sales.
Please discard it according to local environmental laws and guidelines, and take care of the environment; Be sure to take the battery out of the product before it is discarded.The lithium battery used in this product is an important resource that can be recycled. When it is discarded, it can't bedisassembled, discarded or burned at will. Please give it to the garbage recycling station or aprofessional organization for treatment.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
