User Manual

www.frsky‐rc.com
FrSkyElectronicCo.,LtdTel:(86)0510‐85187718Fax:(86)0510‐85187728
E‐mail:frsky@frsky‐rc.comTechnicalSupport:[e-mail]
FrSkyElectronicCo.,Ltd.
FrSky GPS Sensor (V2)
InstructionManual

NOTICE: All instructions, warranties and other collateral documents are subject to change at the sole
discretion of FrSky Electronic Co., Ltd. For further information please visit https://www.frsky-rc.com and click
on the support tab for this product.

Thanks for purchase FrSky’s GPS sensor. To maximize your enjoyment, and to ensure proper sensing, please
read through this manual thoroughly.

Specifications:
Mode: GPS sensor (V2) Interface: S.PORT
Operational Voltage: DC 4 -10 V Weight: 11.3g
Current Draw: 80mA @5V Sensitivity: -160dBm
Operating Temperature Range: -40 ~85℃℃
Date Rate: 1Hz Antenna: Built-in patch
Time to fix: 30s cold
Speed Accuracy: Approx 0.1m/s Position Accuracy: Approx 2.5m CEP
Dimensions: 40mm*20mm*9mm(L x W x H)
Operation Limits: Dynamics 4g /Altitude 50,000m /Velocity 500m/s
Compatibility: FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.

Set Up:
FrSky Smart Port GPS is only compatible with FrSky Smart Port enabled receivers, such as X8R, X6R, X4R,
etc.. Here we take the setup together with X8R receiver for example. For more details, please refer to
corresponding receiver instruction manual.











○
!
The GPS should be mounted with Velcro in your model so that the “UP’ side is facing toward the sky.
FrSky GPS Sensor (V2) - feeds variable directional information such as: Altitude, position, speed, and UTC
time etc., which is displayed in real time on FrSky Transmitter or telemetry dashboard (DHT-U/FLD-02/FSD
etc.).

* Other FrSky S.Port enabled sensors including new Smart Port enabled Variometer Sensor, Lipo Voltage
Sensor, GPS Sensor, RPM Sensor, Airspeed Sensor, and so on.
ID Set up:
Each type of FrSky Smart Port enabled sensor has its unique physical ID. The ID number could be changed
by FrSky Servo Channel Changer (when connect with SCC, the GPS ID is display as 04). Please refer to the
instruction manual of FrSky Servo Channel Changer for details.
○
!
All FrSky Smart Port enabled sensors could daisy chain with each other through their Smart Port.
LED Status:
LED Status GPS Module Smart Port Connection GPS Location
Flash Slow √ √ √
Flash Middle √ √ ×
Flash Middle √ × √
Flash Fast √ × ×
OFF
× — —

