User Manual

31/07/12 12:25 PM
Page 6 of 13http://www.rchacker.com/projects/turnigy-9x/frsky-dht-module-ins…n?tmpl=%2Fsystem%2Fapp%2Ftemplates%2Fprint%2F&showPrintDialog=1
If you have not done so already, and you have one, now is a good time to put the back light for the LCD in otherwise you
can put the main board back in.
Step Two: Fit the bind switch and LED.
Here is your bind switch. On the back of it is a plug for the mode switch I have disconnected the mode switch for now.
More on that later.
We are going to put it about here: Please excuse my mankey bandaid.