User Manual

31/07/12 12:25 PM
Page 3 of 13http://www.rchacker.com/projects/turnigy-9x/frsky-dht-module-ins…n?tmpl=%2Fsystem%2Fapp%2Ftemplates%2Fprint%2F&showPrintDialog=1
The back has some very useful labels. Right now we are interested in the PPM, - and +. These are connected to the
bare wires coming off the module. We are going to connect these to the back of the main board. The four pins at the
base will be used in later in another tutorial to set up the telemetry.
To start take your 9X apart. Six screws on the back and you will find that you have to unplug one cable from the main
board to completely remove the back. The cable is a little stiff but it will come out.