User Manual

http://projects.onomato.biz/projects/android-dash!

Model Configuration

On this screen you can pick a name and type for your Model. Once that is done you can configure

the active channels on this model and manage the alarms for this specific Model.

Also new in this release is that you can define FrSky Module Alarms per Model. On selection of a

model the alarms you previously had configured are transmitted to the FrSky Module.

For safety the alarms on the Module are compared to the alarms set in the app for the current

selected model. This happens on startup of the application. In case these values mismatch a

warning will show.