User Manual

http://projects.onomato.biz/projects/android-dash!
3!
Settings... Application Settings
The Application settings page controls the operation of the application and preferences. You get
access to the following options:
• Audio Settings: Settings controlling the audible aspects of the application
o Set minimum volume upon startup: You can force the application to change the
volume if it is below a certain level upon startup. The slider below is used to set the
volume level. This option has no effect when not set.
o Speaker Interval (sek): How often should the cyclic readout of channels happen
• Logger Settings: Settings controlling what gets logged to file (Location:
SDCard/Android/data/biz.onomato.frskydash/files)
o Binary: Incoming frames is logged directly to binary file
o Human readable: Incoming frames is logged as an ASCII representation of the hex
values. This is for debugging only, and has limited value.
o CSV: Channel Values will be logged to a CSV file that can be read by other
programs.
• Bluetooth Settings: Settings controlling the Bluetooth functionality
o Auto-enable: If toggled, the application will automatically enable bluetooth if it is
currently disabled. If not set, it will request the user to enable bluetooth when not
enabled.
o Auto-connect: If this option is set, the Application will attempt to automatically
connect to the previously connected device.
o Auto-send FrSky alarms when swapping model: If this option is set, the application
will automatically reprogram the FrSky module when you select a model.
• Commands
o Delete all logfiles: will remove all logfiles from
SDCard/Android/data/biz.onomato.frskydash/files