User Manual

On the inside, the gimbals have 3 different types of screws:

● Y axis ratchet and/or "smooth braking" action strengths (blue)

● Y axis spring disable, screw it in to disable spring (green)

● X and Y spring tension (red), screw in for more tension, outer is Y of course.

It is good to note that if you like having weak stick tension, it is easy to get inconsistent centering when the

spring tension screws are too loose. Just tighten them enough for centering to be good enough, and recalibrate.

Also, if you encounter a situation where your throttle stick does not “stay” at the ends when you release it, it is

likely that that the spring disable screw (green) is simply not tightened all the way. Tightening it completely

should solve your problem.

Software overview

Now might be the time to put the battery on charge, so that after reading this section you can directly have a go

at putting what you learned in practice!

Button navigation

The Taranis has 6 input keys: a standard set of +/-/ENTER/EXIT, plus 2 contextual MENU and PAGE keys.

On the main views, the PAGE key will switch between the different views described in the next section. A LONG

press of the PAGE key will bring up the telemetry display. A SHORT press of the MENU key will call the model

menu, while a LONG press will call the radio settings menu. In those 2 menus, a SHORT press of the PAGE