User Manual

Flashing your Taranis radio

As mentioned before, the program of your radio can be replaced, either to change the display language or to

take advantage of new functions or corrections.

The first thing to do is to power your radio off and connect it to your computer's USB port.

Installing the driver (for Windows only)

This is only required the first time you flash your radio on a given computer. If already done you can skip this

section.

● Download the Zadig utility for your operating system from its homepage: http://zadig.akeo.ie/

● Run it as Administrator (Right-click and select the relevant entry).

● In the big dropdown, you should find an entry named "STM32 BOOTLOADER". Select it, and click the

"Install Driver" button.