User Manual

Instant trim: When activating the selected switch the current stick positions will be added to their
respective trims. This is typically assigned to a momentary switch, and used on a maiden flight if you
expect trims to be way off. Instead of frantically clicking the trim tabs, you would hold the sticks so that
the model flies straight, and depress the switch once. It is best to remove that entry after the maiden
flight, to avoid hitting it by mistake and bringing the model badly out of trim again.
Play Sound: Play a simple tone from the available list.
Reset: Resets the selected item (Timer 1, Timer 2, telemetry values, or all of those)
Vario: Turns on variometer sounds (see Telemetry setup)
Play track: Plays a sound file from the SD card, with repeats at the specified interval
Play value: Speaks the current value of the selected parameter, with repeats at the specified interval
SD Logs: Logs the telemetry values to SD card at the specified interval
Volume: Adjusts sound volume using the selected source
Backlight: Turns backlight on
BgMusic, BgMusic || (pause): Plays a selected soundtrack from the SD card. The BgMusic Pause item
pauses the track when activated and resumes it once inactive again, while switching BgMusic off stops
the track completely.
Adjust GVx: When active, sets the relevant global variable to the value of the specified source. The
adjustment source can be one of 4 groups cycled through using a LONG press of the ENTER key:
A fixed value
A proportional control, or a channel with for example specified curve/weight/offset to limit the
adjustment range
Another GVAR
+1/-1, to increment/decrement the GVAR with each activation.
A long press of the ENTER key on a custom function's label will bring up a popup menu that allows you to
copy/paste/delete an entry for more convenient entry of similar settings.
Telemetry
This page groups all the basic telemetry-related settings.
21